GPOE-2B
(PoE Gigabit Injector)
Welcome to the PoE Texas Manual for the GPOE-2B that cost effectively upgrades any non-PoE switch or PoE switch to 2 ports of 30 watt passive PoE which allows you to connect any two PoE devices like a Point to Point Wifi Extender.
The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
Or you’re always welcome to leave questions or comments on our product pages: GPOE-2B
What’s Inside
GPOE-2B
PARTS LIST:
- 1 X GPOE-2B
This Injector is sold without a power supply.
Additional items you’ll need not included:
1 – Screws for mounting
2 – Power supply
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET.
General Installation
A midspan like the GPOE-2B is a simple device to add into any network, and the purpose is to add or increase the PoE of your network without having to upgrade or pick a less optimal switch.
With this wall mounted device, simply mount it near the networking switch you’d like to pair it with. Then, use an Ethernet patch cable to connect a powered device on the LAN and on the POE ports of the PoE midspan. For this device, both the LAN and POE ports will now have that 30 watt potential power budget each.
CONFIGURATION
There is no configuration necessary with this device. Simply plug it in.
The green LED indicates power on. If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.
STEPS:
1 – Unplug the POE ports one at a time to determine which port is having the issue
2 – Troubleshoot the port to determine whether the cable or the device is grounded
Technical Specifications
Product Specifications
| Data + PoE Ports | 1 |
| Data Ports | 1 |
| Data Rate | Gigabit |
| Dimensions | 1 x 1 x 2 in. |
| Input Voltage Range | 12 – 56v DC |
| Max. Amps Per Port | 650 mA |
| Mount Type | Wall |
| Operating Humidity | 5% to 90% |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode B (+4,5 -7,8) |
| Power Input | 2.1 x 5.5 mm DC |
| Power Supplies | None |
| Weight | 1 oz |