GPOE-EXTENDER INSTALLATION MANUAL
Welcome to the PoE Texas Manual for the Extender Line of Products!
The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Extender.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at success@poetexas.com. Phone +1-512-479-0317.
Or you’re always welcome to leave questions or comments on our product page: GAT-Extender
If you’d like to learn more about our extender line to extend multiple devices on one network cable, check out these products: GBT-4-IW and GBT-4-60W.
What’s Inside
PARTS LIST: GAT-EXTENDER
- 1 X Extender
- 2 X IP67 glands [required use for proper install]
Key Features:
- IEEE 802.3at and af compatible
- 10/100/1000 Mbps Data Rate
- IP67 rated for outdoor use; water resitant- DO NOT submerge in water [not water proof]
General Installation
Your new GAT-Extender is designed to be simple to install and set up. This unit is designed for indoor and outdoor use. If using outdoors, the unit is water resistant but not water proof, meaning the unit can withstand rain and snow but do NOT submerge the GAT-Extender in water or other liquids.
To install your GAT-Extender, place the extender inline after your PoE switch or injector (PSE) within a 100m (300 ft) distance from the PSE. Using a second category cable to run to a second GAT-Extender or to your powered device within 100m. Please see the diagram below for distance placement.
To properly install the GAT-Extender the IP67 Glands MUST be used on the input and output side of the extender. Use scissors to cut through the gland and wrap the gland around the base of the category cable. Insert the gland into the GAT-Extender and cover with the metal protector by screwing on. This will assure your extender stays water resistant. For more detail on the install, please watch our youtube video below. Failure to properly install the glands with outdoor usage will lead to water leaks, voiding the warranty on the unit.
Still Have Questions? Want Help Planning?
CONFIGURATION
There is no configuration necessary with this device. Simply plug it in and follow the installation instructions.
Technical Specifications
Product Specifications
| Certifications | IEEE 802.3af (PoE), IEEE 802.3at (PoE+), RoHS Compliant |
| Data + PoE Ports | 2 |
| Data Rate | 10/100/1000 |
| Dimensions | 209 mm x 53 mm x 37.5 mm |
| IP Rating | IP67 |
| Load Regulation | |
| Max Power for Kit | 30 Watts |
| Max. Amps Per Port | 1.1Amp |
| Mount Type | in-line |
| Operating Humidity | 20%-80% Non-Condensing |
| Operating Temperature Range | -40 to 65 C |
| Output Voltage | 55v (Typical) |
| PoE Mode/Pinout | Mode A |
| PoE Standard | IEEE 802.3at |
| PoE Standards Supported | IEEE 802.3af/at |
| Power Input | 44 – 57 volts POE |
| Storage Temperature | -40 to 85 C |
| Weight | .80 lbs |