DENT-TAB 8 and 10 LED Configuration Manual
Welcome to the PoE Texas Manual for the DENT-TAB-8 and DENT-TAB-10!
The purpose of the manual is to help you quickly and effectively navigate the configuration and installation of your new DENT-TAB.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
Or you’re always welcome to leave questions or comments on our product pages: DENT-TAB-10.
What’s Inside
PARTS LIST: DENT-TAB-10-LED
- 1 X 10″ PoE Enabled Display
- 1 X Wall/VESA Mount Bracket
- 1 X Side Mullion Mount Adapter
- 1 X Package Wall Anchors
- 1 X Power Adapter (Not required if using PoE)
PARTS LIST: DENT-TAB-8-LED
- 1 X 8″ PoE Enabled Display
- 1 X Wall/VESA Mount Bracket
- 1 X Side Mullion Mount Adapter
- 1 X Package Wall Anchors
- 1 X Power Adapter (Not required if using PoE)
- 4 X screws and dry-wall anchors
CONFIGURATION
Pre-Configuring Your DENT-TAB
We have found it works best to pre-configure your TAB 8 and 10 prior to installation to make the install process faster and easier. What does “pre-configure” mean?
In this case, a device like the TAB8 and TAB 10 is best controlled by a Mobile Device Manager software, or MDM, which will upload the Denton DBI controller app and secure the device from operating any other software including other browsers.
If you’re new to MDM’s, have no fear. PoE Texas can offer up to three TAB-8 or TAB-10 devices pre-configured on the PoE Texas MDM for you to test and become familiar with how the system works. Then, you can upgrade to your own MDM account or system. Your PoE Texas expert will be happy to help consult with you to find the right MDM to fit your needs and support you in configuring the TAB-8 or TAB-10 using your MDM.
512-479-0317
Ready to learn more about how to design and configure your ControlPortal as well as set up an MDM with profiles for your DENT-TAB? Visit our
ControlPortal Manual
MOUNTING INSTRUCTIONS
Ensure that you’re connected to the same Local Area Network (LAN) as the Primary Gateway COR-TAP to be able to present your ControlPortal. Not sure what all that means? Check out our manual on
ControlPortal
Technical Specifications
Product Specifications
| CPU | 8 Core ARM Cortex A7 CPU, 1.2Ghz |
| Data Rate | 10/100 Mbps |
| Dimensions | 72mm x 70 mm x 10mm |
| Display Type | 10.1 IPS Display, Resolution 1280×800, Brightness:350 nit, Capacitive Touch (5 point) |
| Flash | 8 Gb |
| Input voltage | 12 Volt/1500mA |
| Installation | Wall-Mount |
| Max Power for Kit | 12 watts |
| Mount Type | Wall-Mount |
| PoE Standard | IEEE 802.3af PoE |
| Standard and Protocols | H.264 2160p video decoding, Multi-format FHD video decoding, including Mpeg1/2, Mpeg4 SP/ASP GMC, H.263, H.264, VP6/8, AVS jizun, Jpeg/Mjpeg,etc. H.264 High Profile 1080p@30fps or 720@60fps encoding 3840 x 1080@30fps 3D decoding, BD/SBS/TAB/FP supported Complies with RTSP, HTTP, HLS, RTMP, MMS streaming media protocols |