AT Injector Series Installation Manual
Welcome to the Manual for POE Texas Active (Mode A) AT Injector Series. This series of Injectors cost effectively upgrades any non-PoE switch or PoE switch to 30 watt active PoE!
The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
What’s Inside
AT-4
We do offer this injector with a variety of power supplies so you can select a power supply to fit your application needs.
AVAILABLE POWER SUPPLY OPTIONS:
- AT-4-48V30W [Includes 48 volt 0.625 Amp Power Supply]
- AT-4-48V60W [Includes 48 volt 1.25 Amp Power Supply]
- AT-4-48V120W [Includes 48 volt 2.5 Amp Power Supply]
- AT-4-56V60W [Includes 56 volt 1 Amp Power Supply]
- AT-4-56V120W [Includes 56 volt 2 Amp Power supply]
Additional items you’ll need not included:
1 – Screws for mounting on a wall (optional)
2 – Power supply [see available options above]
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET OR CONTACT A POE-Shifu 512-479-0317.
AT-8
We do offer this injector with a variety of power supplies so you can select a power supply to fit your application needs.
AVAILABLE POWER SUPPLY OPTIONS:
- AT-8-48V60W [Includes 48 volt 1.25 Amp Power Supply]
- AT-8-48V120W [Includes 48 volt 2.5 Amp Power Supply]
- AT-8-56V120W [Includes 56 volt 2 Amp Power supply]
Additional items you’ll need not included:
1 – Screws for wall mounting [optional]
2 – Power supply [optional- see available options above]
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET OR CONTACT A POE-Shifu 512-479-0317.
AT-16
We do offer this injector with a variety of power supplies so you can select a power supply to fit your application needs.
AVAILABLE POWER SUPPLY OPTIONS:
- AT-16-48V120W [Includes 48 volt 2.5 Amp Power Supply]
- AT-16-56V240W [Includes (2x) 56 volt 2 Amp Power supply]
- AT-16-48v700W [Includes pre-assembled (2x) 350 watt Power Supplies]
Additional items you’ll need not included:
1 – Rack Mount screws
2 – Power supply [optional- see available options above]
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET OR CONTACT A POE-Shifu 512-479-0317.
AT-24
We do offer this injector with a variety of power supplies so you can select a power supply to fit your application needs.
AVAILABLE POWER SUPPLY OPTIONS:
- AT-24-56V240W [Includes (2x) 56 volt 2 Amp Power supply]
- AT-24-48V700W [Includes pre-kitted (2x) 350 watt Power Supplies]
Additional items you’ll need not included:
1 – Rack Mount screws
2 – Power supply [optional- see available options above]
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET OR CONTACT A POE-Shifu 512-479-0317.
General Installation
POE Injectors are a simple device to add into any network, and the purpose is to add or increase the PoE of your network without having to upgrade or pick a less optimal switch.
With this wall mounted device, simply mount it near the networking switch you’d like to pair it with. Then, using a short Ethernet patch cable from the switch’s data port to the LAN port on the PoE midspan. Then the POE port adjacent to the LAN port will now have up to 30 watt potential power budget per port.
NOTE: a midspan adds PoE to one data port at a time. So if you connect LAN 1 to a data port on your switch you’ll have Mode A POE on port 1 of the midspan [wait . . . what’s Mode A mean?]. To get POE on port 2, you need to add a patch cable on LAN 2 back to the switch, And so on.
Then connect the POE port to your PoE enabled device.
This is a ACTIVE PoE midspan, meaning it negotiates the IEEE 802.3af/at standard before delivering power. Connecting it to a laptop or other non-PoE device is SAFE for the network card on your device.
CONFIGURATION
There is no configuration necessary with this device. Simply plug it in.
The green LED indicates power on. If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.
STEPS:
1 – Unplug the POE ports one at a time to determine which port is having the issue
2 – Troubleshoot the port to determine whether the cable or the device is grounded
Technical Specifications
AT-4
Product Specifications
| Data + PoE Ports | 4 |
| Data Ports | 4 |
| Data Rate | Gigabit |
| Dimensions | 4x3x1 in. |
| Max. Amps Per Port | 1.25 |
| Mount Type | wall |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 – 60C |
| PoE Method | Active |
| PoE Mode/Pinout | Mode A (1,2- 3,6+) |
| Power Input | 2.1mm DC |
AT-8
Product Specifications
| Certifications | N/A |
| Data + PoE Ports | 8 |
| Data Ports | 8 |
| Data Rate | Gigabit |
| Dimensions | 8x4x1 in. |
| Max. Amps Per Port | 650 mA |
| Mount Type | wall |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 – 60C |
| PoE Method | Active |
| PoE Mode/Pinout | Mode A (-1,2 +3,6) |
| PoE Standard | IEEE 802.3at |
| Power Input |
2.1 mm DC and Phoenix Connector 1840382 44-57 volt Input range |
| Weight | 0.39 |
AT-16
Product Specifications
| Certifications | N/A |
| Data + PoE Ports | 16 |
| Data Ports | 16 |
| Data Rate | Gigabit |
| Dimensions | 19x2x1.75 in. |
| LEDs Per Port | 1 |
| Max. Amps Per Port | 650 mA |
| Mount Type | Rack |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 – 60C |
| Input Voltage | 44 volts to 56 volts |
| PoE Configurable Per Port | No |
| PoE Method | Active |
| PoE Mode/Pinout | Mode A (-1,2 +3,6) |
| PoE Standard | IEEE 802.3at |
| Power Input |
2.1 mm DC and Phoenix Connector 1840382 |
| Weight | 2.1 lbs |
AT-24
Product Specifications
| Certifications | N/A |
| Data + PoE Ports | 24 |
| Data Ports | 24 |
| Data Rate | Gigabit |
| Dimensions | 19x2x1.75 in. |
| LEDs Per Port | 1 |
| Max. Amps Per Port | 650 mA |
| Mount Type | Rack |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 – 60C |
| Input Voltage | 44 volts to 56 volts |
| PoE Configurable Per Port | No |
| PoE Method | Active |
| PoE Mode/Pinout | Mode A (-1,2 +3,6) |
| PoE Standard | IEEE 802.3at |
| Power Input | 2.1 mm DC and Phoenix Connector 1840382 |
| Weight | 2.1 lbs |