GPOE-1B
(PoE Gigabit Injector)
Welcome to the PoE Texas Manual for the GPOE-1B that cost effectively upgrades any non-PoE switch or PoE switch to 30 watt passive PoE!
The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
Or you’re always welcome to leave questions or comments on our product pages: GPOE-1B or GPOE-1B-48V15W or GPOE-1B-48V30W or GPOE-1B-24V30W
What’s Inside
GPOE-1B
PARTS LIST:
- 1 X GPOE-1B
This Injector is sold without a power supply. We do offer pre-kitted options, see below.
Additional items you’ll need not included:
1 – Screws for mounting
2 – Power supply
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET.
GPOE-1B-48V15W
PARTS LIST:
1 X GPOE-1B Midspan Injector
1 X PS-48v15w 48 volt 15 watt DC power supply
We do offer this injector by itself without a power supply so you can select a power supply to fit your application needs.
Additional items you’ll need not included:
1 – Screws for mounting
2 – Power supply
3 – Patch cables to the switch and home run cables to the device
GPOE-1B-48V30W
PARTS LIST:
- 1 X GPOE-1B Midspan Injector
- 1 X PS-48v30w 48 volt 30 watt DC power supply
Additional items you’ll need not included:
1 – Screws for mounting
2 – Power supply
3 – Patch cables to the switch and home run cables to the device
GPOE-1B-24V30W
PARTS LIST:
- 1 X GPOE-1B Midspan Injector
- 1 X PS-24v30w 24 volt 30 watt DC power supply
We do offer this injector by itself without a power supply so you can select a power supply to fit your application needs.
Additional items you’ll need not included:
1 – Screws for mounting
2 – Power supply
3 – Patch cables to the switch and home run cables to the device
General Installation
A midspan like the GPOE-1B is a simple device to add into any network, and the purpose is to add or increase the PoE of your network without having to upgrade or pick a less optimal switch.
With this wall mounted device, simply mount it near the networking switch you’d like to pair it with. Then, using a short Ethernet patch cable from the switch’s data port to the LAN port on the PoE midspan. Then the POE port adjacent to the LAN port will now have that 30 watt potential power budget.
CONFIGURATION
There is no configuration necessary with this device. Simply plug it in.
The green LED indicates power on. If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.
STEPS:
1 – Unplug the POE ports one at a time to determine which port is having the issue
2 – Troubleshoot the port to determine whether the cable or the device is grounded
Technical Specifications
Product Specifications
| Data + PoE Ports | 1 |
| Data Ports | 1 |
| Data Rate | Gigabit |
| Dimensions | 1x1x2 in. |
| Max. Amps Per Port | 650 mA |
| Mount Type | wall |
| Operating Humidity | 5% to 90% |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode B (+4,5 -7,8) |
| PoE Standard | N/A |
| Power Input | 2.1mm DC |